When winter strikes, home waterproofing and leak trapping pays attention to be careful of falling out of the pit. Waterproofing Xiaobian probably tells you the most about the south waterproofing and leak trapping treatment. That's also true for the north waterproofing. In fact, it still pays attention to the north waterproofing in winter. Waterproofing and leak trapping company Xiaobian will let everyone know more about how to deal with waterproofing in winter and what needs attention to avoid falling out of the pit through some cases.

This case shared by Xiaobian of Shandong Waterproofing Company happened in Tianjin, and Uncle Wang of Tianjin was quite depressed these two days. Uncle Wang's house was probably renovated more than ten years ago, and the waterproof layer with a long time is becoming more and more difficult to exert its waterproof effect. The old water in the shower room soon seeped down, and soon it became a "water curtain cave" downstairs. Uncle Wang wanted to ask the waterproof and leak-patching company to repair it, but he hesitated, thinking that the temperature was almost as low as 0℃. Can waterproof be done? In case the waterproof construction is not good, is it not endless trouble? Therefore, Uncle Wang asked Xiao Yang, a waterproof engineer, for advice. Xiao Yang told Uncle Wang that waterproof construction in winter would not be a problem as long as the method is right. Generally, the construction temperature of waterproof materials is required to be not lower than 5℃, so waterproof construction should be carried out in a relatively high temperature period in winter, such as afternoon. Two-component polyurethane waterproof coating, because it is reactive curing, cures faster than ordinary one-component polyurethane waterproof coating, and is more suitable for construction in winter with lower temperature. In winter construction, we should pay special attention to Bo Tu every time, and it is strictly forbidden to be too thick locally. Before construction, the components A and B of polyurethane waterproof coating should be placed indoors at high temperature for 24 hours to prevent the material from condensing; Generally speaking, the initial setting time of polymer waterproof mortar is 4 hours, but the temperature in winter is low, so the second layer can be constructed after 6 hours or more. The final thickness of the polymer cement mortar layer is required to reach 5mm, and then a tile layer is laid on it.

In a word, when winter strikes, family waterproofing and leak-trapping should pay attention to be careful of falling out of the pit. The above are the precautions for family waterproofing in winter shared by Xiaobian of Waterproofing and Leaking Company. For more waterproof knowledge, please pay attention to Shandong Waterproofing and Leaking-trapping Xiaobian.